This can point to debris in the motor or impeller, loose or damaged fittings, or even cracks in the unit itself. Check the pool pump for any irregularities such as leaking or strange humming noises. The following tasks should be performed every month: You can stretch this task to every two weeks if your pool doesn’t get much use. This will kill algae and bacteria, and will also oxidize combined chlorine (chloramines). Add shock treatment to the water at night. This should also include your pool coping and the sealant (caulking) that connects the two. Hose down and brush your pool deck to keep debris, insects, and stagnant water away from your pool. Weak pressure from the jets may also indicate an issue in the plumbing lines. Check the pool return jets are working at full pressure and angled down at 45 degrees to ensure optimal circulation. ![]() If you have a cartridge filter, it needs to be hosed down instead. If your psi is too high (see above point), your sand or D.E filter needs to be backwashed to flush out trapped debris and restore pressure. If it increases by more than 10 psi from your baseline pressure, it means some cleaning is in order (see next point). Check the psi reading on your filter gauge to ensure it has a normal reading of 8-15 psi. If this fills up too much, it will restrict the flow of water and force the pump to work harder for a full cycle. Check and empty the pump strainer basket located in the housing assembly. ![]() The following tasks should be performed every week:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |